Expert Answers about Honda TRX 420

• Phoenix Faucet Spout Compatibility With An Older Faucet Hub
• Without knowing the model of the older faucet I can't 100% confirm it will fit but if you're swapping out the faucet with the same model just a newer year then you shouldn't have an issue installing the Phoenix Faucets Hybrid RV Kitchen Faucet - Single Lever Handle - Brushed Nickel # PF231421 on your older hub.
  view full answer...


• Winch Mount For a 2010 Honda TRX 420 Compatible With Traveller 2,500lb Winch
• Your Traveller 2,500lb winch is very similar to the Bulldog Winch Powersports Series ATV Winch # BDW15006 which will fit on your 2010 Honda TRX 420. They have nearly identical dimensions and ratings. For mounting to you TRX 420 the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114 should fit your Traveller winch without any issues. You can verify that your winch has the same mounting pattern of 3" x 4-15/16" as that is what I see on specs for the Traveller but as we do not carry...
  view full answer...


• Winch Mounting Kit for a 2007 Honda TRX 420
• The mount that you need for a 2007 Honda TRX 420 is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114. This is a custom fit for your vehicle frame and will allow you to mount the winch of your choosing. The Superwinch Terra Series ATV Winch - Wire Rope - Roller Fairlead - 3,500 lbs # SW1135220 you asked from would be an excellent option and is a customer favorite.
  view full answer...


• Installation of Hand-Held Remote Supplied with Superwinch LT3000 Winch # SW1130220
• The hand-held remote control that is supplied on the Superwinch Terra Series ATV Winch # SW1125220 will plug into an included socket that is part of the complete kit. This kit is supplied with both a hard-wired rocker switch that can be handlebar mounted with the included bracket and a wired remote/socket assembly that installs with screws similarly to a vehicle 7-way socket. If you refer to the linked photo you can see these various components which are essentially the same as those supplied...
  view full answer...


• Winch Mount for a 2013 Honda TRX 420
• Yes, I checked and they do list mounting kit # BDW15114 as a fit for your 2013 Honda TRX 420. With this mount you can use Superwinch models LT2000 (SW1120210), LT3000 (SW1130220). The LT2000, # 1120210, is a popular option. I have included a link to a video showing a typical installation for you.
  view full answer...


• Will Custom-Fit ATV Winch Mount Kit, part # BDW15114, Withstand 2,000 Pound Winch Pull
• The steel hardware components included in the Custom-Fit ATV Winch Mounting Kit, part # BDW15114, in addition to providing a mounting location for the LT2000 winch (part # 1120210), also add enough additional steel material to the mounting area on the front of the Rancher frame to reinforce it adequately for the full 2000 pound line pull rating of this winch. My contact at Superwinch confirms that this winch mounting kit hardware provides enough reinforcement to the frame to allow use...
  view full answer...


• Will Champion Winch Fit onto Bulldog Winch Mount for 2008 Honda TRX 420 ATV
• The Bulldog Winch Mount # BDW15114 is confirmed to fit your 2008 Honda TRX 420 and it might work with your Champion Winch. You'll need to measure the bolt pattern on your winch to find out. The Bulldog Winch mount uses either a a 4 bolt pattern of 4.9 inches by 3 inches or a 2 bolt with 3.15 inches spacing.
  view full answer...


• Winch Mount for Superwinch Terra 45 On 2011 Honda TRX 420 Rancher
• In order to mount your Superwinch Terra 45 on your 2011 Honda Rancher 420, you'd need the # BDW15114 Bulldog Custom Winch Mount. I've confirmed the fit of the mount to the UTV as well as the fit of the winch to the mount with Bulldog Winch, they confirm that the mount is a fit for your Rancher and that your Terra 45 winch is compatible with the # BDW15114 mount.
  view full answer...


• Is Fairlead Needed for Bulldog Winch Snowplow Winch # BDW15021
• The Bulldog Winch Snowplow Winch # BDW15021 referenced in your question uses a flat polyester strap. When used as a snowplow winch, which should just require direct up and down use, a fairlead is not necessary. The winch is designed to be used in this manner without a fairlead. I have attached a short video demonstration on this winch that you can also check out.
  view full answer...


• Winch Mount Fit on 2007 Honda TRX 420 Rancher
• We do have a winch mount that is confirmed to fit your 2007 Honda TRX 420 Rancher, which is from Bulldog Winch: - Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114 In regards to your Traveller winch, I was unable to find the exact bolt pattern of these winches, so you'll need to measure yours to see if its bolt pattern will work with this mount. Otherwise, if it is close you may be able to drill some holes in the mounting plate to bolt your winch on.
  view full answer...


• Winch Mount for a 2010 Honda Rancher 420 and Champion Winch
• The Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114 is the correct mount for a 2010 Honda Rancher 420. It is designed for compatibility with winches of many brands. It is a confirmed fit for your vehicle and worst case scenario you may need to drill new holes for your Champion brand winch in the mount itself but your vehicle fit will be precise.
  view full answer...


• Viking Solutions L-E-Vator Portable Loading System Folding Ability for Transport
• The Viking Solutions L-E-Vator Portable Loading System - 300 lbs # 310-VLV001 is designed to be folded up and moved from site to site in the back of a truck or similar vehicle. It is also designed to fit most tree stand carriers for additional portability. It weighs just 20 lbs and comes with a 1 year warranty. It is made of powder coated steel and is reinforced with galvanized steel cable to lift up to 300 lbs. I've attached a couple pictures and a video to assist. The collapsed dimensions...
  view full answer...


• Will Superwinch LT2000 and Winch Mount # BDW15114 Fit a 2012 Honda TRX 420 Recon
• The Superwinch LT2000 # 1120210 and winch mount # BDW15114 will both fit a 2012 Honda TRX 420 Recon. I have included instruction and video links for you to view.
  view full answer...